RGBLink VSP 737 User Manual - Manual (Page 83)

VSP 737 User Manual 83
Upgrade of Picture Firmware:
Upgrade all the four USB ports to improve the picture quality, operations
are as below：
1. Plug USB in USB port;
2. After the device is powered on, go into Menu and select items in turns
as below: MENU —〉VIDEO FU –〉SELECT PORT。
3. Select the needed USB port for upgrade
, LCD screen shows ―Firmware
upgrades, please wait‖.
4.
―Update Main Board Update Success‖ means upgrade is finished,
change to upgrade another USB port, operations are the same as the
above;
5. Power off and power on again to check if the device works normally.