RGBLink VSP 737 User Manual - Manual (Page 33)

2. Hardware Orientation
VSP 737 Front Panel Keyboard Operation
VSP 737 User Manual 33
Details are in: Output Format menu.
Screen Parameter：Set it to the size of LED screen. After setting the Scale
of picture, tap Reset, the current size of the picture is set as screen
parameter.
Gamma: Choose Gamma function and rotate the knob to set the
parameter.
Color temperature：Choose Color temperature function and rotate the knob
to set the parameter.
Move Setup：Tap the key and the key blinks, pre-edit the Move mode
according to the LCD screen instruction and Preview output red frame to
set the size and position of moving the picture; Tap the key again, the key
lights on, setting is finished; Next is the effected operation via MOVE key.
Details are in: How to set picture in and out effect.
Move：After Move Setup, tap MOVE, key lights on, ready for exchange.
Details are in: How to set picture in and out effect.
CROP：Tap the key; rotate the knob to crop the current layer picture. User
can adjust the cropping position and size of the blinking key of either Layer
A or Layer B.
Details are in: How to crop the input picture.
Scale：Tap the key for zoom control; On PIP function, both home screen
and sprite‘s size and position can be adjusted.