RGBLink VSP 737 User Manual - Manual (Page 50)

4.Menu Orientation
MENU
VSP 737 User Manual 50
MENU --- Advance
Press Menu to go back to main menu and use the Knob button and next
to go into Crop setting sub menu to go into Advance:
Pressing NEXT to go into Screen as picture above：
Screen Width；
Screen Height；
Screen Pos X；
Screen Pos Y；
It can realize the narrowing of the signal and the full screen switching.
Knob the switch select others, and Press NEXT to enter other setting.
There are Aspect Ratio, Normal ratios are 4：3 and 16：9，spin the knob
to realize the conversion between the two types.
Delay Call Save: It is to set delaying output time, mainly for the occasion
when several devices are on power together and processor acts as the
rearmost end device, the function is to improve the problems of
indistinguishable input signal and messy code and splashing on LED
screen.
USB Photo Play Time: It is to set playing time of USB single picture, when
need to play the picture for a long while; user should go to this setting.
USB Play Type: It is to set working mode of USB video or picture, the
format of video and picture is selected by user, video and picture cannot
be played at the same time.
USB Play State: It is to set the playing state or stopping state of USB input
signal.
MENU ---Picture
Tap MENU to go back to homepage, flip over the homepage and select
Picture setting; Tap NEXT to go into Picture setting for adjusting picture
quality, it includes: