RLE Protocol Converter V.2.4 - Manual (Page 17)

rletech.com Protocol Converter User Guide 17
2 Installation
2.3.2 RJ45 Ethernet Connection
The Protocol Converter has an internal 10/100BaseT Ethernet port used to configure the
Protocol Converter. The Ethernet port supports Web browser access, BACnet, Modbus,
SNMP, and SMTP (email).
Direct Connection
To make a direct connection between the Protocol Converter and a computer or laptop using
the crossover cable - the blue cable with yellow connectors provided with the device.
Figure 2.3 Protocol Converter Ethernet Connection to a PC Using a Crossover Cable
Subnet Connection
To connect the Protocol Converter on a subnet using a hub or switch and straight-through
CAT5 cables, see Figure 2.4 .
Figure 2.4 Protocol Converter Ethernet Connection to a PC on a Subnet