Smithy Ez-Trol2 - Manual (Page 19)

Figure 5.4 SmithyCNC EZ-Trol II Plug Layout for SmithyCNC 622
Bed Mill
CONNECTING THE EZ-TROL II TO THE CNC 924 LATHE
The power supply enclosure for the CNC 924 is in the base of the lathe. The CNC 924 Lathe has the
same two cables as the two mill, plus an additional 9-pin cable for signals from to the spindle
encoder.
Figure 5.5 Connecting the Control Box to the SmithyCNC 924 Lathe
Please make sure that all connections are properly installed. Avoid loose connections that might
cause problems with the operation.
If any labels are missing or removed, plese replace it right away in order to avoid confusion during
re-installation.
If you need help in installation process, call us Toll Free 1-800-476-4849.
www.smithycnc.com | 13