Smithy Ez-Trol2 - Manual (Page 9)

WARRANTY
Smithy Warranty
SmithyCNC warrants its machines and control systems for a period of one (1) year to the
original purchaser from the date of purchase. If within one (1) year form the date of
purchase a SmithyCNC machine and/or control system fails due to defect in material or
workmanship, SmithyCNC will at their choice repair and/or replace components with new
or remanufactured parts free of charge.
Most warranty repairs and/or replacements are handled routinely, but sometimes request
for warranty service many not be appropriate. This warranty does not apply to defects due
directly or indirectly to misuse, abuse, negligence, accidents, repairs, or lack of routine
maintenance. This warranty is also void if the serial number of the machine or SmithyCNC
control system has been removed or has been altered or modified.
In no event shall Smithy be liable for indirect, incidental or consequential damages for the
sale or use of the product. This disclaimer applies to both during and after the term of this
warranty.
We do not warrant or represent that the merchandise complies with the provisions of any
law or acts unless Smithy Co. so warrants. In no event shall Smithy's liability under this
warranty exceed the purchase price paid for the product. Legal actions brought against
Smithy Co. shall be tried in the State of Michigan, County of Washtenaw.
Smithy Co. shall in no event be liable for death, injuries to persons or property for
incidental, contingent, special or consequential damages arising from the use of our
products.
This is Smithy Co.’s sole warranty and any and all warranties that may be implied by law,
including any merchantability or fitness, for any particular purpose, are hereby limited to
the duration of this written warranty.
This warranty gives you specific legal rights, and you may also have other rights, which
vary from state to state. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusions may not apply
to you.
2
www.smithycnc.com | 3