Smithy Ez-Trol2 - Manual (Page 59)

www.smithycnc.com | 53
N20G04 P5.0
Block 20 paused the machine, G04 for period of five seconds, allowing the spindle to come up to
speed.
N21G43Z1.H2
Block 21 turns on tool length compensation using the height of tool number 2 in the tool table.
N22Z-.25
Block 22 positions the cutter at Z-.25.
N23G1Z-.35F1.08M08
Block 23 Feeds the drill to Z-.35 at the feed rate of .08 and turns the coolant on (M08).
N24G1G41X1.325Y.925D2F115.51
Block 24 moves the end mill in a line (G1). Simultaneously, tool diameter compensation (left) is
started (G41). D2 is the diameter value for tool number 2 in the tool table the end mill is moved to
X1.325, Y .925 and tool radius value is interpolated into the tool path over the course of the move.
The tool is fed at a rate of 115.51.
The block numbers N26 through N50 cut the rectangular pocket in our part.
N25X1.425
N26Y1.075
N27X1.325
N28X1.125
N29Y.725
N30X1.625
N31Y1.275
N32X1.125
N33Y1.075
N34X.925
N35Y.525
N36X1.825
N37Y1.475
N38X.925
N39Y1.075
N40X.725