SONOSAX SX-R4 (Firmware v3.1) - Manual (Page 18)

User manual SONOSAX SX-R4 Page 18 of 53
5.2.2 Solo Monitoring
The [SOLO MONITORING] page can only be accessed from the main [TRACK MONITORING] by pressing
the joystick either upwards or downwards. It allows monitoring in mono of any individual track or a pair of
specific tracks
The display is visually almost identical to that of the [TRACK MONITORING] page except that a round dot
indicates the selected track being soloed.
The track selection sequence is as follow: 1, 2, 1+2, 3, 4, 3+4, 5, 6, 5+6, 7, 8, 7+8.
Pushing the joystick either upwards or downwards moves the selection accordingly.
The Solo Monitoring is only possible for the active tracks assigned in the routing matrix.
Joystick
Short pressure Long pressure
LEFT Reduce the headphone volume in
1 dB steps Reduce the volume continuously
down to minimum
RIGHT Increase the headphone volume in
1 dB steps Increase the volume continuously
up to maximum
UP or DOWN Call SOLO MONITORING page
CENTER Call the CONTEXTUAL MENU page Lock/Unlock the Joystick and the
toggle switch
The example above shows a configuration of 4 active (or assigned) tracks: 1, 2, 3, and 5.
Track 1 being currently selected for Solo Monitoring.
In this particular case, the selection sequence for the Solo is: 1, 2, 1+2, 3, 5
Time Code (HH :MM :SS)
Reference level
TAKE number
Battery charge indicator
Solo track
Volume control - Volume control +