SONOSAX SX-R4 (Firmware v3.1) - Manual (Page 41)

User manual SONOSAX SX-R4 Page 41 of 53
6.1.3 USB 2.0 connection
The SX-R4 is equipped with a USB 2.0 port (USB 1 is not supported). Connecting the SX-R4 to a computer
for file transfer (PC or Mac) is only allowed when the SX-R4 displays one of the following menus:
•
TRACKS MONITORING
•
SOLO MONITORING
•
Unit Status
The SX-R4 posts the following screen when the USB connection is active:
WARNING:
It is highly recommended to use only certified "USB 2 High Speed" cable. The data rate
transmission is so high that using a non certified cable may lead to unpredictable
malfunctions such as Disk not recognized, SX-R4 nor mounting on your desktop, Windows
error code 10 etc.
Notice concerning the CF Cards
If a CompactFlash card is in the SX-R4 when connecting to a computer, it is possible that neither the hard
drive nor CompactFlash card appear on the desktop computer, or that the procedure takes several minutes.
This is directly related to the physical structure (hardware) of the CompactFlash card.
In this case it is necessary to remove the card of the SX-R4 and to connect it directly to the computer via a
card adapter. The hard disk drive of the SX-R4 will then mount on the computer's desktop within seconds.