SONOSAX SX-R4 (Firmware v3.1) - Manual (Page 46)

User manual SONOSAX SX-R4 Page 46 of 53
7. APPENDIX
Example of a USER SETTING file
"USER0000.TXT", located in the "SETTINGS" folder, it can be edited with a simplet test editor.
# Sonosax SX-R4
# ----------------------------------
# Format: max 8 alphanum chars
Project name = TESTMIC
# Format: max 8 alphanum chars
Scene name = GAIN0DB
# Values: +15 dBu, +6 dBu, 0 dBu, -10 dBu
Line in level = +15 dBu
# Values: 1 sec, 2 sec, 5 sec, 10 sec, 20 sec
Pre-Record Time = 1 sec
# Values: 0 sec, 1 sec, 2 sec, 3 sec, 5 sec
Pre-Index Delay = 0 sec
# Values: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Sampling Frequency = 176.4 kHz
# Values: 24, 16D, 16
Sampling Rate [bits] = 24
# Values: Nominal, Up 1 o/oo, Down 1 o/oo
Sampling Up/Down = Nominal
# Values: Mono, Stereo
File format = Mono
# Values: OFF, External WCK, Video In
Synchro mode = OFF
# Values: AES, MIC
Input source 1-2 = MIC
# Values: AES, MIC
Input source 3-4 = MIC
# Values: AES, LINE
Input source 5-6 = LINE
# Line out configuration
# Values: DISABLED, MONO, STEREO, MS, REVERSE STEREO, MONO L, MONO R
Monitor HD Tracks 1-2 = STEREO
Monitor HD Tracks 3-4 = DISABLED
Monitor HD Tracks 5-6 = DISABLED
Monitor HD Tracks 7-8 = DISABLED
Monitor CF Tracks 1-2 = DISABLED
# Routing configuration
# Values: CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8
# To use multiple values, use ','
Routing HD Track 1 = CH1
Routing HD Track 2 = CH2
Routing HD Track 3 =
Routing HD Track 4 =
Routing HD Track 5 =
Routing HD Track 6 =
Routing HD Track 7 =
Routing HD Track 8 =
Routing CF Track 1 = CH1
Routing CF Track 2 = CH2
# Values: NONE, ATT1.5, ATT3, ATT6
Mixing level = NONE
# Monitor configuration
# Values: DISABLED, MONO, STEREO, MS, REVERSE STEREO, MONO L, MONO R
Monitor HD Tracks 1-2 = STEREO
Monitor HD Tracks 3-4 = DISABLED
Monitor HD Tracks 5-6 = DISABLED
Monitor HD Tracks 7-8 = DISABLED
Monitor CF Tracks 1-2 = DISABLED
# Values: +18..-30 [dB]
Headphones Level = 0
# Values: NONE, -9 dB, -12 dB, -18 dB, -20 dB
Modulometers Reference = -9 dB
# Values: NONE, 3 sec, 10 sec, 2 min, Infinite
Modulometers Hold Time = NONE
# Values: Ext Jam Sync, Ext No Jam, Internal, Internal Output
Timecode Input Source = Ext Jam Sync
# Values: Autodetect, 24, 25, 29.97 Non Drop, 29.97 Drop, 30 Non Drop, 30 Drop
Timecode Input Format = Autodetect
# Values: Free Run, Record Run
Timecode Running Mode = Free Run