SONOSAX SX-R4 (Firmware v3.1) - Manual (Page 52)

User manual SONOSAX SX-R4 Page 52 of 53
Synchronization connections
Sync in
Word Clock:
Mode: square wave
Input format: 44.1, 48, 88.2, 96, 176.4 and 192kHz
±
0.2%
Impedance: 75
Ω
Connectors: SMA and Accessory 3M 26 pin
Levels: 0.3 – 7 Vpp
Video:
Mode: Tri-level & bi-level sync-compatible
Input format: 23.976, PAL/25, NTSC/29.97, 1080/23.97, 1080/24,
1080/25, 1080/29.97, 1080/30, 720p/24, 720p/25,
720p/29.97, 720p/30, 720p/50, 720p/59.94,
720p/60, 295M-P/25
Word Clock output
Mode: square wave
Impedance: 75
Ω
Connectors: SMA and Accessory 3M 26 pin
Levels: 3 Vpp
TimeCode connection
TC Input
Mode: SMPTE, JAM sync, no JAM and Internal
Unbalanced on Lemo, balanced on 3M-26pin
Format: Auto, 23.976, 24, 25 and 29.97, 30 drop and non-drop
Impedance: 2k
Ω
Connectors: LEMO 5 pin Aaton and Accessory 3M 26 pin
Levels: 0.3 – 7 Vpp
TC Output
Mode: SMPTE unbalanced
Format: 23.976, 24, 25 and 29.97, 30 drop and non-drop
Impedance: 100
Ω
Connectors: LEMO 5 pin Aaton and Accessory 3M 26 pin
Level: 3 Vpp
TC
Mode: Free run, Record run and Set from time
Remark: The clock time is maintained without batteries or external
PSU for a period of aprox 1 hour.
Its accuracy is
±
1ppm at 25°C, and
±
2ppm from 0°C to 40°c
Power supply connection
Voltage: 6 to 18 V DC
Current:
≈
330mA under 12 Volts
Consumption: average
≈
4W
peak
≈
6W
max
≈
10W during power-up
Connector: Hirose HR10-7P-4P
USB connection
Mode: USB 2.0 HI-SPEED (mass storage device class)
Connector: USB mini B