SONOSAX SX-R4 (Firmware v3.1) - Manual (Page 27)

User manual SONOSAX SX-R4 Page 27 of 53
TIME Current value of the Time Code
(hours:minutes:seconds). If the Time Code
can not be interpreted, -- :-- :-- is displayed.
FORMAT Shows the Time Code format, generated or
received: 23.976, 24, 25, 29.97ND, 29.97D,
30ND,
30D, AUTO, INTERNAL,
UNKNOWN.
AUTO is displayed only if "Internal Output" is
selected (see "SOURCE") and warn that the
output format was not specified (the TC
Alarm is activated).
INTERNAL indicates that the internal
generator is in use (source INTERNAL) or
that EXT JAM SYNC is set but the Time
Code signal is not detected at the input.
UNKNOWN is displayed in EXT NO JAM
mode when no Time Code signal is detected
at the input.
SOURCE Source of the time code signal:
EXT JAM SYNC, EXT NO JAM, INTERNAL,
INTERNAL OUTPUT.
MODE REC RUN, FREE RUN
PROJECT Project name
SCENE Scene name
TAKE Take number
SETTING Name of the currently used USER SETTING
(displayed only if the loaded setting has not
been modified).