Super Systems AC20 RS485 Modbus - Manual (Page 23)

Page 23/59
TITLE: MODBUS/J-BUS Protocol for SSi’s- AC20 ENG. 824E REV. 1
WORDS FOR DEVICE IN CONTROL MODE - PARAMETERS
“Sr.Ln” - Menu group 7 - SERIAL LINK PARAMETERS
ADDRESS
(decimal) DEC. Display R
W
R
JBus Mod
Bus
DESCRIPTION FIGU-
RES
MNEM
CODE
E
A
D I
T
E
527 526 Serial interface protocol
Range:
0 = No serial interface
1 = Modbus
2 = Jbus
Note:
The new data will be activated after the
de-vice answer
N.A. (“S.L.Pr”) x x
528 527 Serial link device address
Note:
The new data will be activated after the
de-vice answer
N.A. (“S.L.Ad”) x x
529 528 Baud rate for serial link
Range:
0 = 600 Baud
1 = 1200 Baud
2 = 2400 Baud
3 = 4800 Baud
4 = 9600 Baud
5 = 19200 Baud
Note:
The new data will be activated after the
de-vice answer
N.A. (“S.L.bd”) x x
530 529 Byte format for serial link
Range:
0 = 8 bits + even parity
1 = 8 bits + odd parity
2 = 8 bits without parity
Note:
The new data will be activated after the
de-vice answer
N.A. (“S.L.bF”) x x