Tecfluid MX4 For FLOMAT Series - Manual (Page 44)

44
12 ASSOCIATED SOFTWARE WINSMETER MX4
Most of the steps in the preceding paragraphs can be done by means of the device
associated software Winsmeter MX4, which allows working in a more comfortable and
intuitive way.
Such software can be downloaded from the following link of the Tecfluid S.A. website.
www.tecfluid.com/descargas/winsmeterMX4.zip
12.1 USB cable connection and drivers installation
Extract the files from the winsmeterMX4.zip to a new system folder.
Execute the Setup.exe file and follow the steps for the installation.
In order to connect the converter to a computer an USB cable is required. This cable is type
A at one end and type B at the other, and it is readily available on the market.
In the picture you can see the ends of the cables.
The first step to do the connection is to open the rear cover of the electronic converter.
SOFTWARE ASOCIADO WINSMETER MX4
12