Tecfluid MX4 For FLOMAT Series - Manual (Page 48)

48
Likewise, to enter into the programming window, just click the corresponding tab.
Changing the parameters of this screen, (see previous page) you can program the different
functions of the equipment
.
As in the previous paragraph, to program this data in the MX4 converter, press the “Send”
button. The message "Saving program" will appear for two seconds in the converter screen.
The programming data will be stored in the memory of the converter.
12.4 Visualization
When the communication with the computer port is established (see section 12.2), the tab
"Visualization" opens. This tab lets you view real-time flow rate, totalizer and velocity values,
as well as the current value of the analog output and the status of the relay outputs.
It is an intuitive tool to verify that the instrument has been installed and programmed
correctly.
By means of the "Record" button, you can store data in different computer files, which can
then be processed by other software.
12
ASSOCIATED SOFTWARE WINSMETER MX4