Tecfluid MX4 For FLOMAT Series - Manual (Page 46)

46
12.3 Access to installation and programming
In order to access the tab "Install", you must enter a password.
The default password is install, and it can be changed using the boxes on the right of the
"Installation" section.
Likewise, to access the tab "Programming" it is necessary to enter the password which by
default is program. This can be changed using the boxes on the right of the "Programming"
section.
Once the password is written, press "Enter" or "Open", and the installation or programming
tab will open. At the bottom of each section the text "Installation tab open" or "Programming
tab open" will be displayed.
To enter the Installation window, just click the corresponding tab.
12
ASSOCIATED SOFTWARE WINSMETER MX4