Vinpower Digital Xerox Standard - Manual (Page 20)

Xerox Duplicator 20
Note: It is normal to see the progress indicator staying at 0-
10% and 100% for approximately 30 seconds for CD duplica-
tion and up to 1 minute for DVD duplication. That is caused by
the initializing and finalizing stages.
Once the duplication run is completed, the successful copies will be ejected
and you should see the following screen.
Remove the successful copies and refill the trays with additional blank me-
dia to continue making more copies. You can also press << to terminate
your project and go back to the Main menu.
If you’ve specified a counter value for your project and your project is com-
pleted, you should see the following screen.
Copying 4012MB
0 12% 481MB
or
Copying 4012MB
0/21 12% 481MB
■ 4012MB indicates the capacity
of the master disc.
■ 0 indicates that no copies have
been made so far.
■ 12% indicates the current
progress of the duplication.
■ 481MB indicates the current
progress of the duplication in
terms of MB.
■ 4012MB indicates the capacity
of the master disc.
■ 0/21 indicates you have a
project size of 21 copies and
you have made 0 copies thus
far.
■ 12% indicates the current
progress of the duplication.
■ 481MB indicates the current
progress of the duplication in
terms of MB.
Pass 7 Fail 0(7)
Waiting for Blanks
■ Pass 7 indicates you have just
made seven successful copies.
■ Fail 0 indicates you have no fail-
ures in this run.
■ 7 indicates you have just made
seven copies thus far.
21 Discs Copied
Press OK to Finish