Vinpower Digital Xerox Standard - Manual (Page 40)

Xerox Duplicator 40
Step 4: You must then return control of the hard disk to the duplicator.
Use the up or down arrow buttons to navigate to the Setup screen.
Step 5: Press >> to enter Setup menu and you should see the following
screen.
Step 6: Using the up or down arrow buttons on the duplicator’s front pan-
el, scroll to the “USB Connection” setting under “Setup” on the duplicator
and press >> to enter:
Step 7: Use the up or down arrow buttons on the duplicator’s front panel
to turn the USB Connection option to “Off” and press >> to enter.
Step 8: Restart the duplicator when prompted.
How to Delete an Existing Hard Drive Partition
Permanently
Note: In this tutorial, the term partition(s) is also used to refer
to image files in the hard drive.
If for some reason you would like to delete your existing hard drive parti-
tion permanently, you can do the following:
Use the up or down arrow button to navigate to the following screen.
XEROX 2.14
12. Setup
Setup
1. Language
Setup
14. USB Connection
USB Connection:
Off
XEROX 2.14
10. Hard Drive Setup