Vinpower Digital Xerox Standard - Manual (Page 63)

63 Xerox Duplicator
■ You will need to perform “Shutdown” and restart the system in
order for this to take effect.
Note: In order to save any changes made to the duplicator’s in-
terface or functionality, you will have to perform the “Save”
function found in the Utility menu, or perform the “Shutdown”
procedure from the Main menu before powering-down the
unit.
Error Messages
Utility
5. Load Default
Table 3-1 Error messages
Error
Code Error Message Recommendation
200 Master Disc Empty The blank disc is in the source tray. Make
sure the source is properly selected and
double check the master disc.
201 Bad Master The master disc is not recognized by the
source tray. Eject and reload the master
disc or double check the master disc for
quality.
202 No Targets There is no blank disc(s) recognized by
the system. Make sure the blanks disc(s) is
properly placed in the recording tray(s).
203 Burner Mixed or Firmware
Version Mixed The writers carry different model/version.
They are required to be identical for prop-
er duplication. Contact Tech Support for
assistance.
204 Targets & Master Not
Compatible The master disc is a different format than
the blank disc(s). The format between the
master disc and blank must be the same.
205 Targets Not Blank The blank media you have inserted are
not blank. Check your blank media quali-
ty.