Vinpower Digital Xerox Standard - Manual (Page 35)

35 Xerox Duplicator
How to Select the Duplication Speed
This process will allow you to adjust the duplication speed subject to your
various needs.
By default, the duplication speed will be set to the optimal speed. However,
under some circumstances, you might want to lower down the duplication
speed. Those circumstances are as follows:
■ Poor Blank Media Quality. When your media quality is not good,
lowering down the duplication speed is necessary to make good cop-
ies.
■ Poor Master Disc Quality. If your master disc condition is not good,
lowering down the duplication speed will reduce the failure rates
greatly.
■ Duplication Quality. Overall, the lower the speed, the higher the
quality of your duplicates. If you have time, it is a good choice to low-
er down the speed to produce the best quality duplicates.
When you turn on your duplicator, after it has booted up, you should see
the following signifying your duplicator is ready.
Step 1: Navigate to Speed Selection menu. Press the up or down arrow
button to navigate to the following screen.
Step 2: Enter Speed Selection menu. Then, you can press >> button to
enter into Speed Selection menu. You should see the following screen.
Select the Duplication Speed Type
There are different types of recording speeds.
■ HDD/CD to CD. Copying to CD-R/RW media from pre-loaded CD par-
titions or original CD media.
XEROX 2.14
1. Copy
XEROX 2.14
7. Select Burn Speed
Select Burn Speed
CD to CD