Vinpower Digital Xerox Standard - Manual (Page 32)

Xerox Duplicator 32
Note: By default, the Auto Start setting is set to Auto. There-
fore, if your duplicator is not completely filled with blank discs
and there is no activity within 30 seconds, or if all the drives are
filled and the duplicator detects this, the duplicator will start
automatically.
Once the number of blank discs you inserted matches the number of discs
detected on the screen, press >> (if you are not using auto start or wish to
speed up the process) to confirm, and the following screen will appear.
If the number of blank discs you inserted does not match the number of
discs detected on the screen, allow 10-15 seconds for the duplicator to rec-
ognize all of your blank discs.
Step 9: After 2 or 3 seconds of processing time, one of the following
Copy Progress screens should appear. The left-hand screen is shown when
“No Counter” is selected, and the right-hand screen is shown when
“Counter” is selected.
Preparing
7 Disc Detected,GO?
■ 7 indicates there are seven discs
that were recognized by the Re-
cording Tray. The actual quanti-
ty may be different depending
upon your machine.
Processing
Please Wait