Vinpower Digital Xerox Standard - Manual (Page 54)

Xerox Duplicator 54
Step 3: Insert your master disc into the top Reader tray and your blank
discs into corresponding Writer trays. Be sure to close the trays after you
load the discs into them. (You can automatically close all trays by pressing
>> when the screen shows “Waiting for Blanks”).
Step 4: Allow 5-10 seconds for the duplicator to detect your master and
blank discs. After your master and blank discs have been recognized, then
you should see the following screen.
Step 5: After 2 or 3 seconds of processing time, the following Copy
Progress Screen will appear.
Note: It is normal to see the progress indicator stay at 0-10%
and 100% for approximately 30 seconds for CD duplication
and up to 1 minute for DVD duplication. This is caused by the
initializing and finalizing stages.
Step 6: Once the duplication run is completed, the successful copies will
be ejected and you should see the following screen.
AUTOCOPY
Waiting for Master
Processing
Please Wait
Copying 4012MB
0 12% 481MB
■ 4012MB indicates the total ca-
pacity of the master disc.
■ The 0 indicates that zero suc-
cessful copies have been made
so far.
■ 12% indicates the current
progress of the duplication.
■ 481MB indicates the current
progress of the duplication in
terms of MB.