Vinpower Digital Xerox Standard - Manual (Page 51)

51 Xerox Duplicator
To enable the Account Management feature by turning ON the “Password
on Bootup” setting. Refer to “Password on Bootup” on page 53 for more in-
formation.
Note: This duplicator comes with standard license which allows
you to create up to 32 users. However, if you desire to create
more than 32 users, contact us regarding our special 64 user li-
cense pack.
Account Management Feature Overview
To access the Account Management feature, you need to perform the fol-
lowing tasks.
When you turn on the duplicator, you should see the following screen.
Step 1: Press the up or down button repeatedly until you see following
screen.
Step 2: Press “>>” button once. You will be asked for the Administrator’s
password
By default, the Administrator’s Password is “0000”. To enter that, press the
up or down button to select the first digit of your password and press the
>> button to submit the current digit; you will then be guided to select the
next digit. Repeat the above steps until you have selected all digits of your
password. After you have entered the password, you will need to press >>
on OK to submit your password.
Once your password is validated, you will be guided to the main Manage
Accounts screen as follows.
XEROX 2.14
1. Copy
XEROX 2.14
14. Manage Accounts
Enter Admins PWD
[XXXXXXX] OK?
Manage Accounts
1. View User