AEC VacTrac Series Conveying Systems - Manual (Page 43)

VacTrac™ Series Conveying Systems Page 43
Mechanical Components WH2-605A.4
Figure 17
Manifold Y-Tube Installation
; Vacuum leaks anywhere in the system reduce system capacity.
; Keep the number of material tube bends, elbows, Y-tubes, and
vacuum T-tubes to a minimum for maximum system capacity.
; Use long radius tube bends on material lines.
; Keep the total length of material conveying flex hose to a
minimum. Long flex hose material runs reduce system
capacity.
; Vertical material tubing runs should be straight up. Inclined
runs can reduce capacity.
; Support tubing about every ten feet with straps, pipe hangers,
or brackets.
; Tube joints must be rigid to prevent vacuum or material leaks.