AEC VacTrac Series Conveying Systems - Manual (Page 66)

Page 66 VacTrac™ Series Conveying Systems
WH2-605A.4 Mechanical Components
• Be sure the solenoid and proximity switch(es) (if
supplied) on vacuum receivers are the same voltage
(24 VDC or 115 VAC) as the VacTrac control panel
control voltage. Consult the control panel serial tag
and the solenoid valve nameplates.
• Wire size depends on control voltage, distance,
number of vacuum receivers, and the number of wires
in each raceway. Consult a qualified electrician.
• Properly ground each receiver to reduce static build-
up generated by material conveying.
- Notes -