AEC VacTrac Series Conveying Systems - Manual (Page 83)

VacTrac™ Series Conveying Systems Page 83
Mechanical Components WH2-605A.4
Notes: • If for any reason the power is turned off, wait at least
three (3) seconds to reset.
• During initial startup, you’ll note some dusting
occurring at the clean air exhaust. This condition is
normal with new filter bags until the exterior
surfaces of the bags become evenly coated with dust
particles, which prevents fine material from passing
through the filter bag pores. This dusting condition
should stop after the first several hours of operation.
- Notes -