AEC FSS Series 1.5- 10 HP Fountain Solution Systems - Manual (Page 10)

FSS Series Fountain Solution Systems Page 9
IAE-600
portable models, and a 35-gallon stainless steel tank is used on the
3 hp, 5 hp, and 7.5 hp stand alone models.
Piping
Process piping is non-ferrous stainless steel or polypropelene
piping for all models.
Pump
Non-overloading ODP motors, horizontally mounted stamped
stainless steel construction.
Other Mechanical Features
• Externally valved drain
• Low condensor water pressure switch
• Low process water flow switch - optional
• NEMA-rated ODP fan motor(s) (FSS-R air-cooled chillers)
• Stainless steel frame, painted cabinetry, on stand alone
models, 2½” (6.4 cm) swivel casters on 2 hp models, 4” (10
cm) swivel casters on 3 hp and 5 hp models.
• Process water bypass for system protection only.
• To Process 2 ½” (63 mm) dual scale liquid-filled water
pressure gauge
• Fully insulated refrigeration piping
• Easy access to the mechanical cabinet
• Continuous Dual Filtration
• Digital Conductivity Readings 0 – 5000
mµs
Electrical Features
• Fully accessible electrical control enclosure on 2 hp to 40 hp
models
• Single-point power and ground connection
• Non-fused (lockable) disconnect switch
• Branch circuit protection
• 230/3/60 and 460/3/60 volt
• 24v DC Control Voltage
• Consult factory for other applications