AEC FSS Series 1.5- 10 HP Fountain Solution Systems - Manual (Page 54)

FSS Series Fountain Solution Systems Page 53
IAE-600
7-4-3 9-second settings
1.) In the operational mode, press the SEL key for 9 seconds until
the display reads Pn-1.
2.) Press the up or down keys to scroll through the menu.
3.) To change the value of a parameter, go to the desired
parameter and press SEL.
4.) The value should appear, press the up or down key to change
the value.
5.) Press the SEL key to return to the menu.
6.) To return to operational mode, hold down the SEL key for 9
seconds.
PARAMETERS DESCRIPTION VALUE
Pn-1 Control Action Code 1
Pdf Input Filter Constant 1.0
P-An Alarm Hysteresis 5
rCJ N/A On
PLC-1 N/A -3
PHC-1 N/A 103
PLC-2 N/A -3
PHC-2 N/A 103
PCUT N/A 0
FUZY On/Off OFF
GAIN N/A 1
ADJO Zero Calibration 0
ADJS Span Calibration 0
OUT N/A 103
dPS1 Parameter Mask 1 255
dPS2 Parameter Mask 2 255
dPS3 Parameter Mask 3 255
dPS4 Parameter Mask 4 255
dPS5 Parameter Mask 5 255
dPS6 Parameter Mask 6 255
dPS7 Parameter Mask 7 255