ARAG GCS 3200 - Manual (Page 38)

38
15.9 Automatic or manual operation
GCS3200 regulates the chemical products output in two different ways:
Automatic or Manual
Fig. 93 Fig. 94
Press F to select the desired mode: the type of active regulation during the job will be displayed.
A Automatic or M Manual (Fig. 93 e Fig. 94).
15.10 Left and right foam marker
Fig. 95 Fig. 96
Press G to activate the left foam marker (Fig. 95).
Press H to activate the right foam marker (Fig. 96).
15.11 Main control
Fig. 97 Fig. 98
Press I to disable (Fig. 97) or enable the main command (Fig. 98).
COMMANDS ONLY WORK IF NO AUXILIARY INPUT DEVICE IS CONNECTED.
USE