ARAG GCS 3200 - Manual (Page 43)

43
• User setting
data description Min. Max. udM notes
Speed
*
Source -- -- -- Values that can be set: Wheel sensor, GPS.
Selected wheel type -- -- -- Possibility to save up to three types of wheel
Wheels setting -- -- -- Groups sub-menus: Constant calculation, Wheel constant
Constant calculation -- -- -- Value that can be set: Manual, Automatic
Wheel constant 0,01 150 cm/imp Number of constant to be set: 1 ÷ 3
Counting distance 20 1000 m
Distance to be travelled during automatic calculation of the
constant
Jobs setup
Available job selection -- -- -- Possible setting: 01 ÷ 20
Application rate Disabled 9999
Metric: l/ha
US: gpa
--
Nozzle -- -- --
Possible settings:
ISO 01 ÷ 20, Type A ÷ E
Nozzles setup
Flowrate 0,01 99,99 l/min
Value can ONLY be edited for custom-made nozzles
Pressure 0,1 99,9 bar
Minimum pressure alarm Disabled 99,9 bar
Value can be edited for custom-made and ISO nozzles
Maximum pressure alarm Disabled 99,9 bar
Working limits
Nozzles wear check Disabled 50 % --
Min. spraying speed Disabled 999,9 km/h --
Regulation lock type -- -- --
Groups the options: Disabled, Min. regulation speed,
Min. regulation pressure
Min. spraying speed Disabled 999,99 km/h --
Min. regulation pressure Disabled 99,9 bar --
Flowrate correct. factor 0,01 10,00 -- --
Test Speed simulation -- -- -- Values that can be set: No, Yes
Tab. 13
• Delivery values
data description Min. Max. udM
Applied quantity
Quantity of fluid dispensed per
unit of surface area
0 9999 l/ha
Speed Vehicle speed 0 99 km/h
Flowrate
Quantity of fluid dispensed per
unit of time
0 999,9 l/min
Pressure Spraying pressure 0 999,9 bar
Tank level Fluid level left in tank 0 9999 l
Rev counter RPM 0 9999 RPM
Tab. 14
• Counters
data description Min. Max. udM
Covered area Covered area 0,000 99999 ha
Applied quantity Dispensed fluid 0 99999 l
Time Time worked 00:00 99999 h
Distace traveled Distance travelled 0,000 99999 km
Tab. 15
* imp = pulse
turn = giro
TECHNICAL DATA