ARAG GCS 3200 - Manual (Page 6)

6
1 risks and protections before asseMbly
The job computer installation operations, except for the main connection (ISOBUS system, Chapter 9) must be performed with
disconnected battery using suitable equipment as well as any type of necessary personal protection.
Use ONLY clean water for treatment tests and simulations: using chemicals during simulated treatment runs can seriously injure
persons in the vicinity.
2 bravo dsb
BRAVO DSB (code 467003) provides reliable diagnostics of computer, control unit or the whole system to troubleshoot any potential problems
experienced with the BRAVO DSB system.
3 intended use
The device you have purchased is a standard ISOBUS system, complying with the ISO11783 standard, to be applied to a crop spraying boom.
This device is designed to work on agricultural machinery for crop spraying applications.
The machine is designed and built in compliance with EN ISO 14982 standard (Electromagnetic compatibility - Forestry and
farming machines), harmonized with 2004/108/EC Directive.
4 precautions
• Do not aim water jets at the equipment.
• Do not use solvents or fuel to clean the case outer surface.
• Do not clean equipment with direct water jets.
• Comply with the specified power voltage (12 Vdc).
• In case of voltaic arc welding, remove connectors from the devices and disconnect the power cables.
• Only use ARAG genuine spare parts and accessories.
5 package content
The tables below indicate the components that you will find in the packages:
Fig. 1
Legend:
1 Job computer
2a* Connection cable for hydraulic unit
2b Connection cable for control unit
2c Sensor connection cable
2d Standard ISOBUS cable
3 Instruction manual
4a Seals for section valve connectors
4b Seals for hydraulic valve connectors
5 Power supply connector
Fig. 2
*The ARAG Auxiliary Input command system is
not compulsory on all systems, therefore it must
be ordered separately.
Some Virtual Terminals allow commanding the
section valves directly from the touch screen.
Legend:
1* Auxiliary input
2* In-cab cable
3* Fixing kit
4* Serial cable
INSTALLATION