Configuration procedure – H3C Technologies H3C S12500 Series Switches User Manual
Page 47
38
Configuration procedure
# Enter system view.
<Switch> system-view
# Enter inbound dot1p-lp priority mapping table view and modify the priority mapping table
parameters.
[Switch] qos map-table inbound dot1p-lp
[Switch-maptbl-in-dot1p-lp] import 0 1 export 0
[Switch-maptbl-in-dot1p-lp] import 2 3 export 1
[Switch-maptbl-in-dot1p-lp] import 4 5 export 2
[Switch-maptbl-in-dot1p-lp] import 6 7 export 3
[Switch-maptbl-in-dot1p-lp] quit
# Configure GigabitEthernet 3/0/1 to trust the 802.1p priority.
[Switch] interface gigabitethernet 3/0/1
[Switch-GigabitEthernet3/0/1] qos trust dot1p
[Switch-GigabitEthernet3/0/1] quit
# Configure GigabitEthernet 3/0/2 to trust the 802.1p priority.
[Switch] interface gigabitethernet 3/0/2
[Switch-GigabitEthernet3/0/2] qos trust dot1p
[Switch-GigabitEthernet3/0/2] quit
# Configure GigabitEthernet3/0/3 to trust the 802.1p priority.
[Switch] interface gigabitethernet 3/0/3
[Switch-GigabitEthernet3/0/3] qos trust dot1p
[Switch-GigabitEthernet3/0/3] quit
# Configure GigabitEthernet3/0/4 to trust the 802.1p priority.
[Switch] interface gigabitethernet 3/0/4
[Switch-GigabitEthernet3/0/4] qos trust dot1p