H3C Technologies H3C S12500 Series Switches - Manual (Page 63)

54
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view or
port group view.
• Enter interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual port-group-name
Use either command.
Settings in interface view take
effect on the current interface.
Settings in port group view take
effect on all ports in the port
group.
3. Enable WRED. qos wred enable N/A
Configuration example
Network requirements
Enable WRED on interface GigabitEthernet 3/0/1.
Configuration procedure
# Enter system view.
<Sysname> system-view
# Enter interface view.
[Sysname] interface GigabitEthernet 3/0/1
# Enable WRED.
[Sysname-GigabitEthernet3/0/1] qos wred enable
Displaying and maintaining WRED
Task Command Remarks
Display WRED configuration
information on the interface or all
interfaces.
display qos wred interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ] Available in any view.