H3C Technologies H3C S12500 Series Switches - Manual (Page 57)

48
Configuring per-queue hardware congestion
management
Configuring SP queuing
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view or
port group view.
• Enter interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
Use either command.
Settings in interface view take effect on
the current interface. Settings in port
group view take effect on all ports in the
port group.
3. Configure SP queuing. qos sp
The default queuing algorithm on an
interface is SP queuing.
4. Display SP queuing
configuration.
display qos sp interface
[ interface-type interface-number ]
[ | { begin | exclude | include }
regular-expression ]
Optional.
Available in any view.
Configuration example
1. Network requirements
Configure GigabitEthernet 3/0/1 to use SP queuing.
2. Configuration procedure
# Enter system view
<Sysname> system-view
# Configure GigabitEthernet 3/0/1 to use SP queuing.
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] qos sp
Configuring WFQ queuing
Configuration procedure
To configure a WFQ queue:
Step Command Remarks
1. Enter system view. system-view N/A