H3C Technologies H3C S9500E Series Switches - Manual (Page 65)

55
Hardware management
This chapter describes the hardware management functions that the switch provides. With these functions,
you can conveniently view the operating status of your switch, and manage and routinely maintain the
hardware modules of your switch.
NOTE:
The output depends on your switch model.
Displaying the electrical label data for your switch
Electrical label data is also called permanent configuration data or archive information, which is written
to the storage component of a card during device debugging or testing.
Use the display device manuinfo command to display your switch’s electrical label information, including
the card name, serial number, MAC address, date of testing and debugging, and vendor name.
# Display the electrical label information about the card in slot 3 on your switch.
• In standalone mode:
<Sysname> display device manuinfo slot 3
DEVICE_NAME: LSR1GT24LEC1
DEVICE_SERIAL_NUMBER: 210235A045B05B004350
MAC_ADDRESS: 000f-e200-5600
MANUFACTURING_DATE: 2008-04-13
VENDOR_NAME: H3C
• In Intelligent Resilient Framework (IRF) mode:
<Sysname> display device manuinfo chassis 1 slot 3
chassis 1 slot 3 :
DEVICE_NAME: LSR1GT24LEC1
DEVICE_SERIAL_NUMBER: 210235A045B05B004350
MAC_ADDRESS: 000f-e200-5600
MANUFACTURING_DATE: 2008-04-13
VENDOR_NAME: H3C
Displaying the card information for your switch
Use the display device command to display card information for your switch, including the slot number,
card type, card status, and software version.
# Display brief information about all cards on your switch.
<Sysname> display device
• In standalone mode:
Slot No. Brd Type Brd Status Software Version
0 LSR1SRP2B2 Master S9500E-CMW520-A1221
1 NONE Absent NONE
2 NONE Absent NONE