H3C Technologies H3C S9500E Series Switches - Manual (Page 68)

58
Displaying the power supply system of your switch
Use the display power-supply command to display the power supply system of your switch.
• In standalone mode:
<Sysname> display power-supply verbose
PSU 1 state: Normal
PSU 2 state: Fault
Line-card power status:
Slot Board-Type Watts Status
---- --------------- ----- ------
2 None -- Absent
3 None -- Absent
4 None -- Absent
5 None -- Absent
6 None -- Absent
• In IRF mode:
<Sysname> display power-supply verbose
Power info on chassis 1:
PSU 1 state: Normal
PSU 2 state: Absent
Line-card power status:
Slot Board-Type Watts Status
---- --------------- ----- ------
2 LSR1GT24LEC1 85 On
3 LSR1GP48LEC1 115 On
4 None -- Absent
5 Unknown 200 Wait
6 LSR1GT24LEC1 85 On
Table 16 Command output
Field Description
PSU x state: State of power supply x.
Line-card power status: Power status of each line card.
Status
Power supply status of the card:
• on—The card is normally supplied with power.
• absent—The card is not in the slot.
• wait—The card is to be supplied with power.
• off—The card is unsolicitedly powered off due to user
operation or over-temperature protection.
Power info on chassis 1 Information about the power supply on the member switch 1.