Displaying and maintaining qos policies – H3C Technologies H3C S7500E Series Switches User Manual

Page 41

Advertising
background image

3-10

To do…

Use the command…

Remarks

Enter control plane view (on a

distributed IRF device)

control-plane chassis chassis-number slot

slot-number

Required

Apply the QoS policy to the

control plane

qos apply policy policy-name { inbound |

outbound }

Required

z

The QoS policy applied to the control plane for a specific slot takes effect only on the slot.

z

In case a global QoS policy conflicts with a control plane QoS policy, the control plane QoS policy

takes effect on the control plane.

z

By default, devices are configured with pre-defined control plane policies, which take effect on the

control planes by default. A pre-defined control plane QoS policy uses the system-index to identify

the type of packets sent to the control plane. You can reference system-indexes in if-match

commands in class view for traffic classification and then re-configure traffic behaviors for these

classes as required. You can use the display qos policy control-plane pre-defined command

to display them.

z

In a QoS policy for control planes, if a system index classifier is configured, the associated traffic

behavior can contain only the CAR or accounting action. In addition, if the CAR action is

configured, only its CIR setting can be applied.

Displaying and Maintaining QoS Policies

To do…

Use the command…

Remarks

Display traffic class information

display traffic classifier

user-defined [ tcl-name ]

Available in any view

Display traffic behavior

configuration information

display traffic behavior

user-defined [ behavior-name ]

Available in any view

Display user-defined QoS policy

configuration information

display qos policy user-defined

[ policy-name [ classifier

tcl-name ] ]

Available in any view

Display QoS policy configuration

on the specified or all interfaces

display qos policy interface

[ interface-type interface-number ]

[ inbound | outbound ]

Available in any view

Display VLAN QoS policy

configuration on a distributed

device

display qos vlan-policy { name

policy-name | vlan vlan-id } [ slot

slot-number ] [ inbound |

outbound ]

Available in any view

Advertising