H3C Technologies H3C S7500E Series Switches - Manual (Page 92)

12-3
# Create a policy named policy, and associate class classifier_1 with behavior behavior_1 in the
policy.
[DeviceA] qos policy policy
[DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1
[DeviceA-qospolicy-policy] quit
# Apply the policy named policy to the incoming traffic of GigabitEthernet 2/0/1.
[DeviceA] interface gigabitethernet 2/0/1
[DeviceA-GigabitEthernet2/0/1] qos apply policy policy inbound
[DeviceA-GigabitEthernet2/0/1] quit
# Display traffic statistics to verify the configuration.
[DeviceA] display qos policy interface gigabitethernet 2/0/1
Interface: GigabitEthernet2/0/1
Direction: Inbound
Policy: policy
Classifier: classifier_1
Operator: AND
Rule(s) : If-match acl 2000
Behavior: behavior_1
Accounting Enable:
16 (Packets)