H3C Technologies H3C MSR 50 - Manual (Page 47)

39
Command line interface
The command line interface of MSR 50 Routers provides plenty of configuration commands. They are
divided in system view into multiple groups, each associated to a view. The user can use these commands
to switch between different configuration views. In general, only certain commands can be executed
under a particular view. But some common commands (such as ping and display current-configuration)
can be executed in all views.
Arranging Slots and Numbering Interfaces
Slot arrangement
The MSR 50 provides many types of interfaces, such as Console, AUX, Ethernet, serial
(synchronous/asynchronous), and asynchronous port. The following describes how these interfaces are
numbered.
Figure 35 Slot arrangement on the MSR 50-40
(1) Slot 0 (2) Slot 1 (3) Slot 2
(4) Slot 3 (5) Slot 4 (6) Slot 5
(7) Slot 6 (8) Slot 7 (9) Slot 8
Note that if an MPU-G2 is applied, its interfaces are on Slot 0.