H3C Technologies H3C MSR 50 - Manual (Page 87)

79
Troubleshooting Application Software Upgrade
Symptom 1:
When upgrading the Comware software using TFTP/FTP, the system displays:
=========================<ETHERNET PARAMETER SET>=========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
==========================================================================
Protocol (FTP or TFTP) :tftp ftp
Load File Name :host
:
Target File Name :target
:
Server IP Address :192.168.1.1
Local IP Address :192.168.1.253
Gateway IP Address :0.0.0.0
FTP User Name :user
FTP User Password :password
Loading...Failed!
Solution:
Fault occurs because the source file does not exist, the network cable is not connected, or the IP address
of the PC is incorrect. Make sure that the source file is in the TFTP/FTP root directory, the cable is
connected securely, and the IP address is set correctly.
Symptom 2:
When upgrading the Comware software using TFTP, the system displays:
=========================<ETHERNET PARAMETER SET>=========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
==========================================================================
Protocol (FTP or TFTP) :tftp ftp
Load File Name :host
:
Target File Name :target
:
Server IP Address :192.168.1.1
Local IP Address :192.168.1.253
Gateway IP Address :0.0.0.0
FTP User Name :user
FTP User Password :password
Loading...
Done!