Grass Valley 3430AP CopperHead User Manual
Page 22
10
Detailed System Description
The left side of the camera unit has two areas of interest:
H) Signal/Data indicators
I) Fan Control switch and indicators
Area H - Signal/Data LED activity indicators
The CopperHead 3430AP Camera Unit Indicator Panel has a series of LED
displays that monitor the various signal paths between the Camera Unit and
the Base Station.
For signals remain constant such as time code and video the LED remains
on as a steady green. For signals that fluctuate such as audio, the LED will
reflect the varying signal activity. If the LED is off either the signal has been
lost or it is not in use.
The LED indicators on the left side of the panel indicate signal paths from
the Base Station to the Camera Unit. Right side LEDs indicate signal paths
from the Camera Unit to the Base Station. Note: the 3G/HD/SD-Dual Link
Indicators are located on the opposite (left) side of the Camera Unit adja-
cent to the 3G/HD/SD-Dual Link SDI Connectors.
The arrow on the panel graphic indicates the direction of the signal - either
to or from the camera unit.