Grass Valley 3430AP CopperHead User Manual
Page 41
29
CopperHead 3430AP
User Manual
Connection Overview of the CopperHead 3430AP Transceiver
System
Fig. 3-2: Connection Overview of the CopperHead 3430AP Transceiver System
Between the Base Station (1) and the HDX-Plus Power Supply (4) connect a pair of ST Fiber
Cables (5).
Power the HDX-Plus Power Supply locally by connecting to AC Power. Between the HDX-Plus (4)
and the Camera Unit connect a length of SMPTE Hybrid Fiber Cable (6). Each end of the fiber
cable will have an SMPTE 304M Connector (3)
.
The Base Station connector (1) may be mounted either on the front or back of the Base Station.
The camera will be powered by the CopperHead 3430AP Camera Unit (2).
The Base Station will be powered by connection to local AC power either directly to the AC
Mains or by use of a 12 VDC external power supply depending on the model of CopperHead
3400 Base Station in use (7).