Grass Valley 3430AP CopperHead - Manual (Page 28)

16
Detailed System Description
Area B – Audio Indicators
LED Indicators to the left side of the label indicate signal paths from the Camera Unit to the
Base Station and right side LEDs indicate signal paths from the Base Station to the Camera Unit.
1 Program Audio Channels
Monitors Return audio from Base Station to Camera
Unit. Channels 3/4 are n/a.
2 I‐Comm (Intercom) Channels 1‐2
Monitors Intercom audio from Camera Unit to
Base Station and from Base Station to Camera Unit
3 DATA 1‐2 Signal
Monitors the serial Data signals to and from Base Station to and from the Camera Unit,
DATA 3 is n/a.
4 E’Net (Ethernet) Signal
Indicates IP Data traffic to and from Camera Unit to and from Base Station
Area C – Video/Data Indicators
5 SDI A‐B Signals
Monitors the 3G/HD/SD-0SDI Dual-Link signals
from the CopperHead 3430AP Camera Unit
6 SDI Digital Video Signal
Monitors SDI return video to the Camera Unit.
7 VBS– Analog Video Signal
Monitors analog Camera video from the Camera Unit to the Base Station and Return video
to the Camera Unit from the Base Station
8 Genlock
N/A for the CopperHead 3430AP system.
9 Prompter
N/A for the CopperHead 3430AP system. Use the VBS signal path.
10 GPI