Grass Valley 3430AP CopperHead - Manual (Page 62)

50
Operation
Operation of the CopperHead 3430AP Transceiver System
A quick push of the Display Mode Selector advances to the Camera
Unit (CAM) diagnostic sub-mode. This mode displays the error status
of the Camera Unit. The Digital Display Characters are green if Cam-
era Unit shows no error and red if the Camera Unit does have an
error. This is a high-level view of the Camera Unit error status. For fur-
ther information go to the Camera Unit diagnostic display.
DIAG/CAM CAM Indicates that the sub-mode is CAM
DIAG/CAM OK Indicates that the Camera Unit is reporting No fault
DIAG/CAM ERR Indicates that the Camera Unit is reporting Some fault
This display cycle repeats until the Display Mode Selector is pushed
Display Mode
Typical
Readout Base Station Digital Display Activity Explanation