Grass Valley 3430AP CopperHead User Manual
Page 40
28
Installation and Connection
1 Position your camera so that you can easily access the battery mounting plate at the rear of
the camera. Ensure that the camera is well supported and stable.
2 Attach the CopperHead 3430AP Camera Unit to the camera battery mounting plate. The
mounting is mechanically identical to attaching a battery. S e e
on page 35 for details of the camera unit-to-camera connections..
For configuration please see Chapter 4.
Connecting the CopperHead 3430AP Transceiver System
Prior to connecting your CopperHead 3430AP Transceiver System please ensure that each of the
required cables is available for use. This includes standard video, audio and data cables as well as
any custom multi‐pin cable sets required for your particular installation. Please see Appendix A
for information regarding cables, signals and custom multi‐pin cable fabrication.
Note that the use of any existing CopperHead 3400 Base Station without ST Fiber Connectors is
not covered in this user guide.
Covered in this chapter are:
1 Overview of connections between the three main system components.
2 Connections between the CopperHead 3400 Base Station and the base video infrastructure &
power components
3 Connections between the CopperHead 3430AP Camera Unit and the video camera & power
components.
Note: The following fiber connection scenario does not take into account any customized cable
and connector installations you may have at your facility. For assistance regarding more
complex connection situations please contact Grass Valley or your local authorized dealer.