Grass Valley 3430AP CopperHead - Manual (Page 29)

17
CopperHead 3430AP
User Manual
Monitors the Tally/GPI signals to and from Base Station and Camera Unit
11 Time Code
Monitors the house time code from the Base Station to the Camera Unit
Area D – Signal Strength Indicators/Setup
12 Signal Strength Readout in dBm
This display changes between display modes when
selected
13 Readout Function Indicator
BASE RX – Optical Link signal strength received
at Base Station from Camera Unit
CAM RX – Optical Link signal strength received at Camera from Base Station
DIAG – Digital display is in Diagnostic mode
14 Select Button
Chooses between three modes of operation
For details on how the setup/diagnostic functions operate, please see The CopperHead
3400 Base Station Digital Display on page 47 .
Area E – Status/Power Indicators
15 Power Switch & Power Indicator
Toggle switch to enable or disable Base Station
power.
LED turns Green when on/off switch is changed to
the ON position.
For an AC-powered base station to be properly powered, the AC Mains switch on the rear
of Base Station must be in the ON position.
16 Hybrid Power Indicators
The Hybrid Power indicators are N/A in the CopperHead 3430AP system