Grass Valley 3430AP CopperHead - Manual (Page 54)

42
Operation
Operation of the CopperHead 3430AP Transceiver System
Both the Camera Unit and the Base Station have a digital display selector button which allows
multiple functions for the digital display. These functions are described below, beginning on
page 46.
Intercom Usage
The CopperHead 3400 B a se St a t i o n is delivered pre‐configured for compatibility with one of
three s t a n d a rd intercom systems:
1 Clear‐Com Intercom
2 RTS intercom
3 Standard Four Wire Intercom
Wiring for each of these options is described in Appendix A.
The operation of your specific intercom system is beyond the scope of this User’s Guide. Please
see the documentation provided with your intercom or consult your intercom provider.
Intercom controls and indicators are found on the rear of the CopperHead 3430AP Camera Unit
and provide the following functionality:
1 Headset volume control for two Intercom channels and Program audio.
2 Sidetone adjustment to control the volume of the operator’s voice heard on the intercom
headset. It does not affect the mic volume on the intercom channel.
3 Control of the Push-To-TALK (PTT) function for each Intercom Channel, either locally or
through a remote PTT switch.
4 LEDs show audio activity on the two Intercom and Program audio channels.
Note that intercom beltpacks cannot be plugged into the CopperHead 3430AP Camera Unit.
Only an intercom headset can be plugged into the Camera Unit.