Configuring the server - part 2 – Grass Valley K2 Storage System Instruction Manual v.3.2 Nov.18 2008 User Manual
Page 163
July 15, 2008
K2 Storage System Instruction Manual
163
Configuring the server - Part 2
Configuring the server - Part 2
1. Return to the Configure K2 Server page from which you launched Storage Utility
and proceed as described in the following table:
On this page…
Do this…
File System Server
Configuration
This page checks on the
configuration of the server in
one of its main roles as a file
system server. The server
also functions as a file
system client, which is also
checked from this page.
Click
Check
. When the wizard reports that the configuration is correct,
click
Next
.
If you get a “The V: will not be available until this device is rebooted…”
message, you can safely continue with this procedure and follow the
instructions related to this message later in the procedure.