Grass Valley K2 Storage System Instruction Manual v.3.2 Nov.18 2008 User Manual
Page 183
Advertising
July 15, 2008
K2 Storage System Instruction Manual
183
Setting up the Level 20R Gig E switch
5. Set Spanning Tree to
On
and click
Apply Changes
. If prompted, log in with the
switch’s administrator username and password.
6. Click
Port Configuration
.
7. If you do not need trunks, such as on a one-switch system, skip to the next step in
this procedure. If you need trunks, such as on a two-switch system with ISLs, do
the following:
a. Select (Ctrl + Click) the trunked ports. Typically the trunked ports are at the
bottom of the list and are labeled Trk1.
b. Click
Modify Selected Ports
.
If prompted, log in as administrator.
Advertising