Grass Valley Kayenne v.3.0 - Manual (Page 364)

364 KAYENNE — User Manual
Section 3 — System Operation
ME Split Mode
The ME Mode menu is used to activate Split Mode on an ME and assign
resources to the partitions. Touch
ME , Mode to access the menu, then select
the desired ME and touch Split to partition that ME ( Figure 229 ).
Figure 229. ME Mode Menu, Split ME Selected
In Split operating mode, the ME is divided into Primary and Secondary par-
titions. The Primary partition has the Pgm A and Pgm B outputs that use
the Background A and B buses, and the Secondary output has the Pgm C
and D outputs that use the Utility buses. The Pgm Out columns on the
menu are re-arranged when Split mode is selected to show the A and B
Primary outputs on the left and the C and D Secondary outputs on the
right.
The Secondary Assign pane is used to assign Keyers to the Secondary par-
tition. Assignments made here affect what elements are learned and
recalled by the E-MEM levels (see Split MEs and E-MEM Control
on
page 367 ). Touching an item so its yellow indicator illuminates assigns it to
the Secondary partition. The buttons for these items are then activated on
the Secondary partition outputs. Unselected items remain assigned to the
Primary partition. Note that keyers can be activated or deactivated (green
button indicators on or off) on the individual outputs if desired, the same
as in Programmable Clean Feed mode.